5 Ideas for Putting up Wood Shelf Brackets

Wood shelf brackets will help you make quick work of easy shelving projects around the house. Whether or not you are using L-brackets or putting in slots and brackets, the next tips might help make working with wooden cabinets a lot easier.

1. Use Heavy Duty Anchors in Drywall

If you may be putting in shelf brackets in drywall, consider using heavy-duty anchors relatively than a budget plastic ones. Heavy-duty anchors are usually made of metal or aluminum and provide much better assist for shelving brackets than do the thin plastic anchors which can be commonly sold at home improvement centers. Heavy-duty drywall anchors fully expand behind the surface of the drywall and can provide much stronger assist for the bracket and shelf.

2. Use a Degree and Measuring Tape

When putting in wood shelf brackets, you should not only careabsolutely measure the space between the brackets with a tape measure, you must also be certain that they’re level. Through the use of your level together with a tape measure and straight edge, you can ensure that your shelf brackets are perfectly straight and true. This is not going to only create a stronger base in your shelf, it’s going to also make your shelves look like they had been professionally installed.

3. Pre-Drill Screw Holes

Whether or not you are installing drywall anchors or utilizing wood screws to screw into a stud behind the wall, it’s best to all the time pre-drill screw holes. Pre-drilling the holes will make inserting your screws a lot easier, and also allow you to to avoid damaging wall surfaces. This will result in lots less time being spent on repairing partitions with drywall or wood putty. Pre-drilling the holes can even make it easier to to insert the screws evenly and straight, and likewise require loads less elbow grease when turning the screws with a screwdriver.

4. Keep away from Sagging Cabinets

A quite simple shelf may be made with a bit of plywood and a few L-brackets. However, when making this type of shelf, you should all the time use the thickest piece of plywood available to you, and ensure that your L-brackets are properly spaced. When putting in L-brackets on a easy shelf, it’s best to guantee that the brackets are not any more than about 16 to twenty inches apart. Typically talking, you must attempt to install the brackets wherever a stud is current behind the drywall. This will end in a a lot stronger shelf and stop sagging within the middle. Sagging shelves are dangerous if used to store heavy items.

5. Install L-Bracket Earlier than Hanging Shelf

If you happen to’ll be using L-brackets to assist a wooden shelf, you may discover it easier to attach the L-brackets to the shelf piece earlier than hanging it on the wall. Nonetheless, before hanging the shelf, you must all the time make it possible for your screw holes are pre-drilled, and in case you are using drywall anchors, that they’re installed. It is much easier to connect the shelf board on the bracket while you could have it on a desk or table, slightly than making an attempt to attach the shelf while standing on a ladder.

If you have any thoughts regarding where by and how to use Heavy Duty Countertop Brackets, you can make contact with us at our own web-page.