Granite Help Tips And Brackets Guide

As a granite assist guide, in designs where your countertop spans helps, the size of the span (side to side as your facing it) must be limited to 24″ for ¾” (2CM) thick stone and 36″ for 1¼” (three CM) stone thicknesses.

For designs where your countertop is cantilevered or overhangs the supports, overhanging portion ought to be limited 16″ to 24″.

Granite assist requirements: Fragile stones might require corbels and helps which can be spaced closer collectively and that don’t allow as much overhang than the specs here.

Use granite countertop brackets when overhanging stone counters. Considering that granite, marble, and limestone can have overhangs weighing hundreds of pounds, and considering how brittle granite countertops might be, granite assist brackets are imperative. Quartz countertops usually do not need support.

Granite helps might be either purposeful, ornamental, or both relying in your granite countertop installation. And in contrast to laminate countertops that do not require supports, natural stone countertops require some thought and understanding of why and the way they will be used. It’s greatest to let an skilled similar to your granite fabricator determine the need. See Unique Granite Bracket for knowledgeable help on hidden countertop support.

Are your granite countertop brackets robust sufficient? Be certain that the helps you select are made of 1/2″ thick metal!

What measurement granite countertop support brackets will you need?

The scale of your granite help legs and brackets will probably be based on your overhang . For example, if your granite overhangs 12 inches past your 2 x 4 knee wall, subtract 2-4″ for the desired length of your support bracket. In this case, an eight” or 10″ deep bracket is called for.

The way to add support brackets to existing countertops

You should use entrance mounting brackets to add assist for countertops which might be already put in, creating an open, floating countertop effect. If you happen to’re dealing with sheet-rock over studs on a knee wall, you are able to do the following:

* Remove the sheet-rock over the stud where the bracket shall be mounted.

* Mount the bracket to the stud and be certain that the top of the bracket is stage with the beneathside of the granite. The horizontal plate of the bracket should be level. If mandatory, shim the bracket between the vertical plate and the stud, not on the horizontal plate.

* After installing the bracket, use a “Fast Patch” sheet-rock kit to cover the bracket.

If you loved this post and you would certainly like to get additional facts regarding Modern Shelf Brackets kindly check out our own page.