The way to Set up Shelf Brackets

Installing our metal shelf brackets and other hardware is probably simpler than you think. With a few instruments and a bit of preparation, open shelving is an easy DIY project. Most of the same tools and ideas work for installing our other hardware like metal hooks, coat racks, towel bars, and other projects (see beneath for particular ideas).

Shelf Bracket Installation

As a basic rule, it’s always excellent to put in shelf brackets into wall studs. Nevertheless, it may be difficult to install brackets directly on a wall stud In that case, we recommend utilizing a toggle anchor (which are available for purchase right here). The installation directions are similar. *If putting in into tile, brick, or additional thick dry wall, please read under for further recommendations.

RECOMMENDED TOOLS FOR BRACKET INSTALLATION:

7/sixteen” Wrench or Socket

Stud Finder

Stage

Electrical Drill

Pencil & Masking Tape

Lag Bolts (we embody these with each bracket order but in addition available at your native hardware store) OR needed bolts for specialty installation into concrete or brick installation*

Digital stud finder may be useful

Steps:

1. Before starting, confirm the bracket and shelf are the right size and match together. Establish crucial bolts and hardware wanted for specific project. Note: if you’re using a J fashion bracket, we include a flush mount screw for backside gap in case shelf interferes.

2. Determining the place you’d just like the shelf. Place a protracted piece of masking tape horizontally alongside the wall, spanning the length of your piece of wood shelf.(this also givs an amazing visual of how your cabinets will look before making the dedication!)Utilizing a stage, mark a stage line alongside the tape.

3. Locate the studs in the wall and mark the studs alongside the level line. (Not able to find studs? Use recommended toggle bolt anchors instead)

4. Pre-drill a three/16″ gap the place your degree line and your studs intersect (pre-drilling also helps the lag bolt go in smoothly and reduces probability of bolt head breaking)

5. Remove all masking tape from the wall.

6. Install the brackets with the offered bolts utilizing a wrench or socket. (If using J brackets, flush mount screws are included for backside bolt gap if needed)

7. Place your wood onto the brackets. (L brackets require wood screwed directly onto bracket arm).

Set up With out Wall Studs:

When wall studs usually are not available, we strongly counsel utilizing toggle bolts. They’re an broadenable anchor that grips the back side of the drywall. They’re easier to make use of than they give the impression of being! We have now them available for buy that match our different hardware, which is wantred in case you are mounting some brackets into studs and others with the toggle bolts. They can be found at any local hardware store. For our toggles, use a 5/8″ drill bit to pre-drill the hole.

If you liked this short article and you would such as to receive even more details concerning Modern Shelf Brackets kindly visit the webpage.

Share and Enjoy !

0Shares
0 0